> Ebe etiti: 400mm
> Ogologo nha: 200mm
> Ọnụ ọgụgụ zuru ezu (FS): 200-600mm
> Akụkụ: 45mm * 27mm * 21mm
> voltaji ọkọnọ: 12...24VDC
> Ike oriri:≤960mW
> Mkpebi: 100μm
> Izi ezi nke ahịrị: ± 0.2% FS (ebe dị anya 200mm-400mm);
± 0.3% FS (ebe nha anya 400mm-600mm)
> ± Tinyegharịa ziri ezi: 300μm @ 200mm-400mm; 800μm@400mm (Gụnye) - 600mm
> Oge nzaghachi: <10ms
RS-485 | PDE-CR400TGR |
4...20mA + 0-5V | PDE-CR400TGIU |
Ogologo etiti | 400mm |
Oke nha | ± 200mm |
Ọnụ ọgụgụ zuru oke (FS) | 200-600mm |
voltaji ọkọnọ | 12...24VDC |
Ike oriri | ≤960mW |
Ibu ibu ugbu a | ≤100mA |
Mbelata voltaji | <2V |
Isi iyi ọkụ | Laser na-acha uhie uhie (650nm); ọkwa laser: Klas 2 |
Dayameta doo | Ihe dị ka Φ500μm (na 400mm) |
Mkpebi | 100μm |
izi ezi nke ahịrị | ± 0.2% FS ( nha nha 200mm-400mm) ; ± 0.3% FS ( nha nha 400mm-600mm) |
Tinyegharịa izi ezi | 300μm@200mm-400mm;800μm@400mm(gụnyere) -600mm |
Mpụta 1 (Nhọrọ ụdị) | Uru dijitalụ: RS-485(Protocol Modbus nkwado) ;Ngbanwe uru:NPN/PNP na NO/NC settable |
Mpụta 2 (Nhọrọ ụdị) | Analog: 4...20mA (nkwụsị ibu | 300Ω) / 0-5V; Uru mgbanwe: NPN/PNP na NO/NC settable |
Ntọala anya | RS-485:Kwụsị igodo/RS-485 ntọala;Analog:Ntọala igodo |
Oge nzaghachi | <10ms |
Akụkụ | 45mm * 27mm * 21mm |
Ngosipụta | Ngosipụta OLED (Nha: 18*10mm) |
Okpomọkụ ịkpafu | 0.03% FS/℃ |
Ihe ngosi | Ihe ngosi laser na-arụ ọrụ: ọkụ na-acha akwụkwọ ndụ na-enwu; Gbanwee ihe ngosi mmepụta: ìhè edo edo |
sekit nchedo | Nchedo sekit dị mkpụmkpụ, nchekwa polarity, nchekwa oke ibu |
Ọrụ arụnyere n'ime ya | Adreesị ohu & ntọala ọnụego Baud; Ntọala efu ;Njụajụjụ paramita; Nyocha onwe ngwaahịa; Ntọala mmepụta; Nkuzi otu n'otu / nkuzi isi isi abụọ/ nkuzi isi atọ; Nkuzi windo; Ntọgharị data ụlọ ọrụ |
gburugburu ọrụ | Okpomọkụ ọrụ: -10…+45℃;Okpomọkụ nchekwa:-20…+60℃;Ambient okpomọkụ:35...85% RH(Ọ dịghị condensation) |
Ọkụ ambient | Ìhè n'ọkụ:<3,000lux; nnyonye anya ìhè anyanwụ:≤10,000lux |
ogo nchedo | IP65 |
Ihe onwunwe | Ụlọ: Zinc alloy; Lens: PMMA; Diaplay: Glass |
Iguzogide ịma jijiji | 10...55Hz Ugboro abụọ amplitude1mm,2H nke ọ bụla na X,Y,Z ntụziaka |
Mkpali resista | 500m/s² (Ihe dị ka 50G) ugboro 3 ọ bụla na ntụzịaka X,Y,Z |
Njikọ | eriri ihe mejupụtara 2m (0.2mm²) |
Ngwa | M4 ịghasa (ogologo: 35mm) x2, aku x2, gasket x2, arịọnụ nkwado, ntuziaka ọrụ |