Obere elu nkenke 12V 24V DC RS485 dijitalụ laser displacement sensọ PDE-CR50series
> Ebe etiti: 50mm
> Oke nha: ± 15mm
> Ọnụ ọgụgụ zuru ezu (FS): 35-65mm
> Akụkụ: 45mm * 27mm * 21mm
> voltaji ọkọnọ: 12...24VDC
> Ike oriri:≤960mW
> Mkpebi: 10μm
> izi ezi nke ahịrị: ± 0.1% FS;
> Nwegharịa izi ezi: 30μm
> Oge nzaghachi: <10ms
| RS-485 | PDE-CR50TGR |
| 4...20mA + 0-5V | PDE-CR50TGIU |
| Ogologo etiti | 50mm |
| Oke nha | ± 15mm |
| Ọnụ ọgụgụ zuru oke (FS) | 35-65 mm |
| voltaji ọkọnọ | 12...24VDC |
| Ike oriri | ≤960mW |
| Ibu ibu ugbu a | ≤100mA |
| Mbelata voltaji | <2V |
| Isi iyi ọkụ | Laser na-acha uhie uhie (650nm); ọkwa laser: Klas 2 |
| Dayameta doo | Ihe dịka Φ70μm (at50mm) |
| Mkpebi | 10μm |
| izi ezi nke ahịrị | ±0.1% FS |
| Tinyegharịa izi ezi | 30μm |
| Mpụta 1 (Nhọrọ ụdị) | Uru dijitalụ: RS-485(Protocol Modbus nkwado) ;Ngbanwe uru:NPN/PNP na NO/NC settable |
| Mpụta 2 (Nhọrọ ụdị) | Analog: 4...20mA (nkwụsị ibu | 300Ω) / 0-5V; Uru mgbanwe: NPN/PNP na NO/NC settable |
| Ntọala anya | RS-485:Kwụsị igodo/RS-485 ntọala;Analog:Ntọala igodo |
| Oge nzaghachi | <10ms |
| Akụkụ | 45mm * 27mm * 21mm |
| Ngosipụta | Ngosipụta OLED (Nha: 18*10mm) |
| Okpomọkụ ịkpafu | 0.03% FS/℃ |
| Ihe ngosi | Ihe ngosi laser na-arụ ọrụ: ọkụ na-acha akwụkwọ ndụ na-enwu; Gbanwee ihe ngosi mmepụta: ìhè edo edo |
| sekit nchedo | Nchedo sekit dị mkpụmkpụ, nchekwa polarity, nchekwa oke ibu |
| Ọrụ arụnyere n'ime ya | Adreesị ohu & ntọala ọnụego Baud; Ntọala efu ；Njụajụjụ paramita; Nyocha onwe ngwaahịa; Ntọala mmepụta; Nkuzi otu n'otu / nkuzi isi isi abụọ/ nkuzi isi atọ; Nkuzi windo; Ntọgharị data ụlọ ọrụ |
| gburugburu ọrụ | Okpomọkụ ọrụ: -10…+45℃;Okpomọkụ nchekwa:-20…+60℃;Ambient okpomọkụ:35...85% RH(Ọ dịghị condensation) |
| Ọkụ ambient | Ìhè n'ọkụ:＜3,000lux; nnyonye anya ìhè anyanwụ:≤10,000lux |
| ogo nchedo | IP65 |
| Ihe onwunwe | Ụlọ: Zinc alloy; Lens: PMMA; Diaplay: Glass |
| Iguzogide ịma jijiji | 10...55Hz Ugboro abụọ amplitude1mm,2H nke ọ bụla na X,Y,Z ntụziaka |
| Mkpali resista | 500m/s² (Ihe dị ka 50G) ugboro 3 ọ bụla na ntụzịaka X,Y,Z |
| Njikọ | eriri ihe mejupụtara 2m (0.2mm²) |
| Ngwa | M4 ịghasa (ogologo: 35mm) x2, aku x2, gasket x2, arịọnụ nkwado, ntuziaka ọrụ |
Dee ozi gị ebe a ziga anyị ya
