> Masaafada dhexe: 400mm
> Cabbirka cabbirka: 200mm
> Miisaanka buuxa (FS): 200-600mm
>Cabir:45mm*27mm*21mm
> Voltage Supply: 12...24VDC
>Awoodda isticmaalka:≤960mW
>Xalka:100μm
> Saxnaanta khadka: ± 0.2% FS (qiyaasta masaafada 200mm-400mm);
± 0.3%FS (qiyaasta masaafada 400mm-600mm)
> ± ku celi saxnaanta:300μm@200mm-400mm;800μm@400mm(Ku dar) -600mm
>Waqtiga jawaabta:<10ms
RS-485 | PDE-CR400TGR |
4...20mA + 0-5V | PDE-CR400TGIU |
Masaafada dhexe | 400mm |
Qiyaasta kala duwan | ± 200mm |
Miisaanka buuxa (FS) | 200-600mm |
danab sahayda | 12...24VDC |
Awooda isticmaalka | ≤960mW |
Ku shub hadda | ≤100mA |
Hoos u dhaca korantada | <2V |
Isha iftiinka | Laysarka cas (650nm); Heerka Laser: Fasalka 2 |
Dhexroorka beam | Qiyaastii Φ500μm (oo ah 400mm) |
Qaraarka | 100μm |
Saxnaanta toosan | ± 0.2% FS (qiyaasta masaafada 200mm-400mm) ; 0.3% FS (qiyaasta masaafada 400mm-600mm) |
Ku celi saxnaanta | 300μm@200mm-400mm;800μm@400mm(Ku dar)-600mm |
Soo saarista 1 (doorashada moodeelka) | Qiimaha dhijitaalka ah:RS-485(Taageerida Hab-maamuuska Modbus) |
Natiijada 2 (doorashada moodeelka) | Analog:4...20mA(Cabbin Load |
Dejinta fogaanta | RS-485: Keypress/RS-485 habaynta; Analog: Keypress settings |
Waqtiga jawaabta | <10ms |
Cabirka | 45mm*27mm*21mm |
Bandhig | Muujinta OLED (Xajmiga: 18*10mm) |
Heerkulka leexleexan | <0.03%FS/℃ |
Tilmaame | Tilmaamaha shaqada ee laser: iftiinka cagaaran shid; Daar tilmaame wax soo saarka: iftiin jaale ah |
wareegga ilaalinta | Ilaalinta wareegga gaaban, ilaalinta polarity celinta, ilaalinta xad dhaafka ah |
Shaqada la dhisay | Ciwaanka addoonta & Dejinta heerka Baud; Dejinta eber; Weydiinta cabbirka; Is-baaritaanka badeecada; Dejinta wax soo saarka |
Deegaanka adeegga | Heerkulka hawlgalka:-10…+45℃;Heerkulka Kaydinta:-20…+60℃; Heerkulka deegaanka:35...85%RH(ma laha uumi) |
Iftiinka ambient-ka-hortagga ah | Iftiinka gubanaya:<3,000lux; Faragelinta iftiinka qoraxda:≤10,000lux |
heerka ilaalinta | IP65 |
Qalab | Guriyeynta:Aluminium Zinc;Lens:PMMA;Diaplay:Glass |
Gariir iska caabin | 10...55Hz labajibbaaran1mm,2H midkiiba jihooyinka X,Y,Z |
Iska caabin degdeg ah | 500m/s² (qiyaastii 50G) 3 jeer midkiiba jihooyinka X,Y,Z |
Isku xirka | 2m fiilada isku dhafan (0.2mm²) |
Agabka | furka M4 (dhererka: 35mm) x2, lowska x2, gaaska x2, bracket-koritaanka, buug-gacmeedka |