Contact us: export_gl@shlanbao.cn
Digital display laser displacement sensor PDE series
Likarolo tse kholo: boholo bo nyane, ho nepahala ho phahameng, mesebetsi e mengata, ts'ebetso e phahameng haholo
Boholo bo nyane, matlo a aluminium, a tiile ebile a tšoarella.
Phanele e bonolo ea ts'ebetso e nang le ponts'o ea dijithale ea Visua OLED, tlatsa litlhophiso tsohle tsa ts'ebetso kapele.
0.5mm ultra lightspot, metha lintho tse nyane ka nepo.
Ho nepahala ho pheta-pheta ho fihla ho 800um, ho fihlela phapano ea mehato e nepahetseng haholo.
Litlhophiso tse matla tsa ts'ebetso, mekhoa e feto-fetohang ea tlhahiso.
Moralo o felletseng oa tšireletso, ts'ebetso e matla e khahlanong le tšitiso.
Tekanyo ea ts'ireletso ea IP65, e sebelisoang habonolo libakeng tse nang le metsi le lerōle.
Tšireletso e meraro
Tšireletso e khutšoanyane ea potoloho
Ha mojaro o le khutšoanyane, sehlahisoa le mojaro li sirelelitsoe hore li se ke tsa chesa.
Tšireletso e khutlisetsang morao polarity
Sehlahisoa se ke ke sa chesoa ha lipalo tse ntle le tse mpe tsa phepelo ea motlakase li khutlisetsoa morao.
Tšireletso e feteletseng
Sireletsa ka tsela e iketsang ha mojaro o sa tsitsa kapa ho eketseha ha hona joale, ho qoba ho hloleha ha sehlahisoa.
Phanele ea ts'ebetso le mesebetsi
Sethala sa nako ea karaboLitlhophiso tsa sebaka sa 'mapaBoemo ba HysteresisHo beha boleng ba phetoho e ntle
Litsela tsa ho hlahisaSetting ea mokhoa oa ho utloaLitlhophiso tsa ho kenya ka ntleLitlhophiso tsa parameter ea puisano
Maemo a kopo
Tekanyo ea bophahamo ba sistimi ea ho fana ka nepo
Tekanyo ea deformation ea solar panel warping
Setšoantšo sa parameter
| RS-485 | Tlhaloso: PDE-CR50TGR | Tlhaloso: PDE-CR100TGR | Tlhaloso: PDE-CR400TGR |
| 4...20mA + 0-5V | Tlhaloso: PDE-CR50TGIU | Tlhaloso: PDE-CR100TGIU | Tlhaloso: PDE-CR400TG |
| Sebaka se bohareng | 50mm 100mm 400mm |
| Lekhalo la ho lekanya | ± 15mm ± 35mm ± 200mm |
| Sekala se felletseng(FS) | 35-65mm 65-135mm 200-600mm |
| Matla a phepelo | 12...24VDC |
| Tšebeliso ea matla | ≤960mW |
| Laola hona joale | ≤100mA |
| Ho theoha ha motlakase | <2V |
| Mohloli oa leseli | Laser e khubelu (650nm); Boemo ba Laser: Sehlopha sa 2 |
| Beam bophara | /Ka Φ120μm(ka 100mm）/Ka Φ500μm(ka 400mm) |
| Qeto | 10μm 100μm |
| Ho nepahala ha mola | ± 0.1% FS / ± 0.2% FS (ho lekanya sebaka 200mm-400mm);±0.3%FS(ho lekanya sebaka 400mm-600mm) |
| Pheta ho nepahala | 30μm 70μm 300μm@200mm-400mm;800μm@400mm(Kenyelletsa)-600mm |
| Output 1(Khetho ea mohlala) | Boleng ba dijithale:RS-485(Support Modbus protocol);Boleng ba phetoho: NPN/PNP le NO/NC settable |
| Output 2(Khetho ea mohlala) | Analog: 4...20mA(Moroalo oa ho hanyetsa)/0-5V; Boleng ba phetoho: NPN/PNP le NO/NC settable |
| Sebaka sa sebaka | RS-485:Keypress/RS-485 setting;Analoge:Ho tobetsa konopo |
| Nako ea ho arabela | <10ms |
| Boemo | 45mm*27mm*21mm |
| Pontšo | Pontšo ea OLED(Boholo:18*10mm) |
| Ho hoholeha ha mocheso | ℃0.03%FS/℃ |
| Sesupo | Letšoao la ho sebetsa la Laser: lebone le letala le butse; switjha sesupo sa tlhahiso: leseli le mosehla |
| Tšireletso potoloho | Ts'ireletso ea potoloho e khuts'oane, ts'ireletso ea reverse polarity, ts'ireletso ea boima bo feteletseng |
| Mosebetsi o hahiloeng | Litlhophiso tsa liaterese tsa lekhoba le maemo a sekhahla sa Baud;Peakanyo ea Zero;Potso ea paramethara;Itlhahlobe ka sehlahisoa;Peakanyo ea sephetho;Thuto ea ntlha-ntlha/thuto ea lintlha tse peli/thuto ea lintlha tse tharo;Thuto ea lifensetere;Ho seta botjha data ka fekthering |
| Tikoloho ea litšebeletso | Mocheso oa tšebetso:-10…+45℃;Mocheso oa polokelo:-20…+60℃;Mocheso oa tikoloho:35...85%RH(Ha ho condensation) |
| Khanya e khahlanong le tikoloho | Leseli la incandescent:＜3,000lux; Tšitiso ea khanya ea letsatsi: ≤10,000lux |
| Digree tsa tshireletso | IP65 |
| Lintho tse bonahalang | Bolulo:Alloy ea Zinc;Lense:PMMA;Sets'oants'o:Khalase |
| Hanyetsa ho sisinyeha | 10...55Hz Double amplitude1mm, 2H e 'ngoe le e 'ngoe ho X,Y,Z litsela |
| Khahlanong le tšusumetso | 500m/s²(Hoo e ka bang 50G) makhetlo a 3 e 'ngoe le e 'ngoe ka litsela tsa X,Y,Z |
| Khokahano | 2m thapo e kopaneng (0.2mm²) |
| Sesebedisoa | M4 screw(bolelele:35mm)x2,nut x2,gasket x2,bracket e ntseng e hola, buka ea tšebetso |
Lipotso tse ling
Nako ea poso: May-11-2024