CMOS principle high end design laser sensor optimum to measure distances. Harmless laser light source to accurately measure very tiny objects. Optimal algorithm achieves accurate detection and stable measurements, of any workpiece, of miniature bearing seal installation inspection and of chip stacking or missing judgment. With OLED digital display, it is quite convenient to read and operate. Multiple built-in functions can fully satisfy different application demands.
> Displacement measurement detection
> Measuring range: 80...500mm
> Housing size: 65*51*23mm
> Light spot: Φ2.5mm@500mm
> Consumption power: ≤700mW
> Resolution: 15um@80mm:500um@500mm
> Output: RS-485(Support Modbus protocol); 4...20mA(Load resistance<390Ω)/PUSH-PULL/NPN/PNP And NO/NC Settable
> Ambient temperature: -10…+50℃
> Housing material: Housing: ABS;Lens cover:PMMA
> Complete circuit protection: Short circuit,reverse polarity,overload protection
> Protection degree: IP67
> Anti-ambient light: Incandescent light:<3,000lux
> The sensors are equipped with shielded cables, wire Q is the switch output.
Plastic Housing | ||
Standard | ||
RS485 | PDB-CC50DGR | |
4...20mA | PDB-CC50TGI | |
Technical specifications | ||
Detection type | Distance measurement | |
Measuring range | 80...500mm | |
Full scale(F.S.) | 420mm | |
Supply voltage | RS-485:10...30VDC;4...20mA:12...24VDC | |
Consumption power | ≤700mW | |
Load current | 200mA | |
Voltage drop | <2.5V | |
Light source | Red laser(650nm);Laser level:Class 2 | |
Light spot | Φ2.5mm@500mm | |
Resolution | 15um@80mm:500um@500mm | |
Linear accuracy | RS-485:±0.3%F.S.;4...20mA:±0.4%F.S. | |
Repeat accuracy | 30um@80mm;250um@250mm; 1000um@500mm | |
Output 1 | RS-485(Support Modbus protocol); 4...20mA(Load resistance<390Ω) | |
Output 2 | PUSH-PULL/NPN/PNP And NO/NC Settable | |
Distance setting | RS-485:Keypress/RS-485 setting; 4...20mA:Keypress setting | |
Response time | 2ms/16ms/40ms Settable | |
Dimensions | 65*51*23mm | |
Display | OLED Display(size:14*10.7mm) | |
Temperature drift | ±0.02%F.S./℃ | |
Indicator | Power indicator:Green LED;Action indicator:Yellow LED; Alarm indicator:Yellow LED | |
Protection circuit | Short circuit,reverse polarity,overload protection | |
Built-in function | Slave address & Port rate setting;Parameter query; Product self-check;Output setting;Average setting; Single point teach;Window teach;Restore factory settings | |
Service environment | Operation temperature:-10…+50℃; Storage temperature:-20…+70℃ | |
Ambient temperature | 35...85%RH(No condensation) | |
Anti ambient light | Incandescent light:<3,000lux | |
Degree of protection | IP67 | |
Material | Housing: ABS;Lens cover:PMMA | |
Vibration resistance | 10...55Hz Double amplitude1mm,2H each in X,Y,Z directions | |
Impulse resistance | 500m/s²(About 50G)3 times each in X,Y,Z directions | |
Connection type | RS-485:2m 5pins PVC cable;4...20mA:2m 4pins PVC cable | |
Accessory | Screw(M4×35mm)×2、Nut×2、 Washer×2、Mounting bracket、Operation manual |
ZX1-LD300A81 Omron