LAP series Label Sensor Slot width 3mm Slot depth 60mm NPN PNP Infrared label photoelectric sensor
Photoelectric Label Sensor LAP Series， with their numerous advantages, have found widespread applications in various fields. As technology continues to advance, photoelectric tag sensors will play an even more important role in the future.
>Slot width:3mm
>Slot depth:60mm
>Min detection width/depth:≥2mm
>Light source:Radiation light（940nm）
>Response time:≤50us
>Delay after startup:≤300ms
>Supply voltage high/low:12-24VDC
>Leakage current:≤30mA
>Output current:≤10mA
| NPN | LAP-TR03TNB | LAP-TR03TNB-F3 |
| PNP | LAP-TR03TPB | LAP-TR03TPB-F3 |
| Slot width | 3mm |
| Slot depth | 60mm |
| Min detection width/depth | ≥2mm |
| Light source | Infrared light（940nm） |
| Response frequency | Max 10kHz |
| Conveyor speed | ≤20m/min (0.3m/s) |
| Response time | ≤50us |
| Delay after startup | ≤300ms |
| Supply voltage high/low | 12...24VDC |
| Leakage current | ≤30mA |
| Warning output | Red indicator light on |
| Switch output function | Light on/ dark on (Switchable) |
| Voltage drop | ≤2V |
| Output current | ≤10mA |
| Indicator |
Red light: Calibration error / operation error; Green light: NO NC; Blue light: detect label switch output signal |
| Operation temperature | -20...60℃(No icing, no condensation) |
| Storage temperature | -30...70°C |
| Protection degree | IP65 |
| VDE safety level | Ⅲ |
| Weight | Approximately 55g (100g with wire) |
| Material |
Zinc die casting; surface electroless nickelplating (Silver); PC plastic |
| Connection | 2m 3 pins cable/25cm cable+M8 connector |
CX-442、CX-442-P-Z、CX-444-P-Z、E3Z-LS81、GTB6-P1231 HT5.1/4X-M8、PZ-G102N、ZD-L40N
Write your message here and send it to us
