MH40-T0805LS1DA-F8 Measuring Light Grids RS485 NPN PNP Photoelectric Sensor
LANBAO MH family light grids are widely used for length, width and height detection, it serves as an important role in providing great solutions for a wide variety of applications in logistics and factory automation. As an intelligent light curtain, it can offer high productivity, suitable for all standard applications, including protrusion monitoring or object height and width measurement. Connection to the control is established via push-pull switching outputs or RS485 outputs, saving time and resources to operate and maintain.
> Measuing light curtain
> Sensing distance: 0~5m
> Output: RS485/NPN/PNP, NO/NC settable*
> Output indicator: OLED indicator
> Scanning mode: Parallel light
> Connection: Emitter: M12 4 pins connector+20cm cable; Receiver: M12 8 pins connector+20cm cable
> Housing material: Aluminium alloy
> Complete circuit protection: Short circuit protection, Zener protection, surge protection and reverse polarity protection
> Protection degree: IP67
> Anti-ambient light: 50,000lx(incidence angle≥5°)
> Accessory: Mounting bracket × 2, 8-core shielded wire × 1 (3m), 4-core shielded wire × 1 (15m)
| Number of optical axes | 8 Axis | 16 Axis | 24 Axis | 32 Axis | 40 Axis |
| Emitter | MH40-T0805L-F2 | MH40-T1605L-F2 | MH40-T2405L-F2 | MH40-T3205L-F2 | MH40-T4005L-F2 |
| Receiver | MH40-T0805LS1DA-F8 | MH40-T1605LS1DA-F8 | MH40-T2405LS1DA-F8 | MH40-T3205LS1DA-F8 | MH40-T4005LS1DA-F8 |
| Detection area | 280mm | 600mm | 920mm | 1260mm | 1560mm |
| Response time | 5ms | 10ms | 15ms | 18ms | 19ms |
| Number of optical axes | 48 Axis | 56 Axis | |||
| Emitter | MH40-T4805L-F2 | MH40-T5605L-F2 | |||
| NPN NO/NC | MH40-T4805LS1DA-F8 | MH40-T5605LS1DA-F8 | |||
| Protection height | 1880mm | 2200mm | |||
| Response time | 20ms | 24ms | |||
| Technical specifications | |||||
| Detection type | Measuring light curtain | ||||
| Sensing distance | 0~5m | ||||
| Optical axis distance | 40mm | ||||
| Detecting objects | Φ60mm opaque object | ||||
| light source | 850nm Infrared light (modulation) | ||||
| Output 1 | NPN/PNP, NO/NC settable* | ||||
| Output 2 | RS485 | ||||
| Supply voltage | DC 15…30V | ||||
| Leakage current | ＜0.1mA@30VDC | ||||
| Voltage drop | ＜1.5V@Ie=200mA | ||||
| Synchronization mode | Line synchronization | ||||
| Load current | ≤200mA (Receiver) | ||||
| Anti ambient light interference | 50,000lx(incidence angle≥5°) | ||||
| Protection circuit | Short circuit protection, Zener protection, surge protection and reverse polarity protection | ||||
| Ambient humidity | 35％…95％RH | ||||
| Operating temperature | -25℃…+55℃ | ||||
| Consumption current | ＜120mA@8 axis@30VDC | ||||
| Scanning mode | Parallel light | ||||
| Output indicator | OLED indicator LED indicator | ||||
| Insulation resistance | ≥50MΩ | ||||
| Impact resistance | 15g, 16ms, 1000 times for each X, Y, Z axis | ||||
| Impulse Withstand Voltage Tes | Peak voltage 1000V, last for 50us, 3 times | ||||
| Vibration resistance | Frequency: 10…55Hz, amplitude: 0.5mm (2h per X,Y,Z direction) | ||||
| Protection degree | IP65 | ||||
| Material | Aluminium alloy | ||||
| Connection type | Emitter: M12 4 pins connector+20cm cable; Receiver: M12 8 pins connector+20cm cable | ||||
| Accessories | Mounting bracket × 2, 8-core shielded wire × 1 (3m), 4-core shielded wire × 1 (15m) | ||||
