Slot photoelectric sensor DTP series NPN+PNP NO/NC Through beam Flat layer switch for Elevator industry
Detection method:Through beam
Rated distance:30mm(Not adjustable)
Standard target:Φ6mm Above opaque objects
Light source:Infrared LED(Modulation)
Output type:NO/NC Optional(depends on part No.)
Supply voltage:10…30 VDC
Smallest detector:Φ3mm Above opaque objects
Load current:≤100mA
Residual voltage:≤2.5V
Response time: Max, 1ms
| NPN+PNP | NO/NC | DTP-U30S-TDFB |
| Detection method | Through beam |
| Rated distance | 30mm(Not adjustable) |
| Standard target | Φ6mm Above opaque objects |
| Light source | Infrared LED(Modulation) |
| Output type | NO/NC Optional(depends on part No.) |
| Supply voltage | 10…30 VDC |
| Smallest detector | Φ3mm Above opaque objects |
| Load current | ≤100mA |
| Residual voltage | ≤2.5V |
| Consumption current | ≤20mA |
| Circuit protection | Short circuit protection, overload protection, reverse polarity protection |
| Response time | Max, 1ms |
| Output indication | Yellow LED |
| Anti ambient light | Sunshine:≤20000Lx;Incandescent:≤3000Lx |
| Ambient temperature | - 15C…55C |
| Environment humidity | 35-95%RH(No condensation) |
| High pressure resistant | 1000V/AC 50/60Hz 60s |
| Insulation resistance | ≥50MQ(500VDC) |
| Vibration resistant | Complex amplitude 1.5mm 10 … 50Hz(2 hours each in X, Y, and Z directions) |
| Protection degree | IP64 |
| Connection | 4-pin 2m PVC cable |
Write your message here and send it to us
