Diffuse mode sensors are particularly easy to install, since only one device has to be fitted and no reflector is required. These sensors operate primarily at close range, feature optimum switching accuracy, and can reliably detect even very small objects. They have both the emitter and receiver elements built into the same housing. The object itself acts as a reflector, eliminating the need for a separate reflector unit.
> Diffuse reflection
> Sensing distance: 30cm
> Housing size: 35*31*15mm
> Material: Housing: ABS; Filter: PMMA
> Output: NPN,PNP,NO/NC
> Connection: 2m cable or M12 4 pin connector
> Protection degree: IP67
> CE certified
> Complete circuit protection: short-circuit, reverse polarity and overload protection
Diffuse reflection |
||
NPN NO/NC |
PSR-BC30DNBR |
PSR-BC30DNBR-E2 |
PNP NO/NC |
PSR-BC30DPBR |
PSR-BC30DPBR-E2 |
Technical specifications |
||
Detection type |
Diffuse reflection |
|
Rated distance [Sn] |
30cm |
|
Light spot |
18*18mm@30cm |
|
Response time |
<1ms |
|
Distance adjustment |
Single-turn potentiometer |
|
Light source |
Red LED (660nm) |
|
Dimensions |
35*31*15mm |
|
Output |
PNP, NPN NO/NC (depends on part No.) |
|
Supply voltage |
10…30 VDC |
|
Residual voltage |
≤1V |
|
Load current |
≤100mA |
|
Consumption current |
≤20mA |
|
Circuit protection |
Short-circuit, overload and reverse polarity |
|
Indicator |
Green light: Power supply, signal stability indication; |
|
Ambient temperature |
-15℃…+60℃ |
|
Ambient humidity |
35-95%RH (non-condensing) |
|
Voltage withstand |
1000V/AC 50/60Hz 60s |
|
Insulation resistance |
≥50MΩ(500VDC) |
|
Vibration resistance |
10…50Hz (0.5mm) |
|
Degree of protection |
IP67 |
|
Housing material |
Housing: ABS; Lens: PMMA |
|
Connection type |
2m PVC cable |
M12 connector |
QS18VN6DVS、QS18VN6DVSQ8、QS18VP6DVS、QS18VP6DVSQ8