Diffuse reflection sensors are used for the direct detection of objects, with an economic design to integrate transmitter and the receiver into one body. The transmitter emits light which is reflected by the object to be detected and seen by the receiver. Therefore additional functional components (such as reflectors for retro-reflective sensors) are not needed for the operation of a diffuse reflection sensor.
> Diffuse reflection;
> Sensing distance: 10cm
> Housing size:19.6*14*4.2mm
> Housing material: PC+PBT
> Output: NPN,PNP,NO,NC
> Connection: 2m cable
> Protection degree: IP65> CE certified
> Complete circuit protection: short-circuit,overload and reverse
Diffuse Reflection |
|
NPN NO |
PSV-BC10DNOR |
NPN NC |
PSV-BC10DNCR |
PNP NO |
PSV-BC10DPOR |
PNP NC |
PSV-BC10DPCR |
Technical specifications |
|
Detection type |
Diffuse Reflection |
Rated distance [Sn] |
10cm |
Standard target |
50*50mm white cards |
Light spot size |
15mm@10cm |
Hysteresis |
3...20% |
Light source |
Red light(640nm) |
Dimensions |
19.6*14*4.2mm |
Output |
NO/NC (depends on part No.) |
Supply voltage |
10…30 VDC |
Load current |
≤50mA |
Voltage drop |
<1.5V |
Consumption current |
≤15mA |
Circuit protection |
Short-circuit, overload and reverse polarity |
Response time |
<1ms |
Output indicator |
Green:power,stable indicator;Yellow:output indicator |
Operation temperature |
-20℃…+55℃ |
Storage temperature |
-30℃…+70℃ |
Voltage withstand |
1000V/AC 50/60Hz 60s |
Insulation resistance |
≥50MΩ(500VDC) |
Vibration resistance |
10…50Hz (0.5mm) |
Degree of protection |
IP65 |
Housing material |
Shell material: PC+PBT, lens:PC |
Connection type |
2m cable |
E3FA-TN11 Omron